Australian Capital Territory Numbered Regulations Australian Capital Territory Numbered RegulationsAnyone filling or capping safety cartridges under the authority of the licence must comply with the following requirements:
(a) the filling and capping process must be carried out safely;
(b) no other activities that may adversely affect the safety of the filling and capping process are to be conducted near to the process;
(c) any propellant stored in the room being used in the filling and capping process must be isolated from the operation and any source of ignition;
(d) any propellant being directly used for the filling and capping process must not be exposed unnecessarily and must not be exposed to a source of ignition;
(e) the quantity of propellant present must be no greater than is reasonably necessary for the process;
(f) a person who takes part in the filling or capping process or the handling of cartridges must wear clothing and footwear that does not contribute to the accidental initiation of explosives used in the process;
(g) flammable liquids and gases, combustible liquids and other combustible materials must be isolated, as far as practicable, from the filling and capping process;
(h) when the filling operation is completed the equipment used in the operation must be cleaned, and any spills of propellant must be removed and disposed of safely.
Division 2.4.9 Filling or capping safety cartridges—non-commercial purposes