Australian Capital Territory Numbered Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

FAIR TRADING (CONSUMER PRODUCT STANDARDS) REGULATIONS 2002 (NO 39 OF 2002) - REG 15

Amendment of AS/NZS 1249

    (1)     For regulation 13, AS/NZS 1249 is taken to be amended as mentioned in table 1.

Table 1     Amendments of AS/NZS 1249 for reg 13

[1.1]     Clause 0.1

omit

It also covers requirements for the labelling of paper patterns for these garments.

[1.2]     Clause 1.2 (a)

insert after 1st paragraph

If there is insufficient fabric for 3 lengthwise and 3 widthwise test specimens, as cited in ISO 6941, clause 8.7, the flame spread time is to be decided on 3 lengthwise test specimens only.

If the textile material or garments are constructed with one fabric overlaying another (for example, quilted fabrics), specimens must be cut and tested as a combination, that is, as if the overlay were appliqued to the under fabric.

[1.3]     Clause 1.2 (a), 3rd paragraph

omit

four or more of six specimens

substitute

3 or more specimens

[1.4]     Clause 1.2 (a), note

substitute

NOTE: ISO 6941 is to have effect for this division as if it states that, if in any 1 set of 3 specimens, 1 result exceeds the lowest result by 50% for no apparent reason, or, if 1 or 2 specimens fail to reach 1 of the marker threads, another specimen is required to be tested for that direction or face.

[1.3]     Clause 1.3

after

use of trims.

insert

The outer fabric of a composite or appliqued area must be considered the fabric face and must be tested so that the flame impinges on that surface.

[1.4]     Clause 5.6

omit

    (2)     For regulation 14, AS/NZS 1249 is taken to be amended as mentioned in table 2.

Table 2     Amendments of AS/NZS 1249 for reg 14

[2.1]     Clause 0.5.3, notes

omit

[2.2]     Clause 0.5.10

omit

(See Note 1 to Clause 0.1)

[2.3]     Clause 5.6

after

shall bear a

insert

clearly visible



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback