(1) This regulation applies if—
(a) a person tests or inspects a consumer piping system, part of a system or gas appliance—
(i) following gasfitting work in relation to the system, part of the system or appliance; or
(ii) at the request of the owner or occupier of the premises where the system or appliance is located; and
(b) the system, part of the system or appliance is safe.
(2) The person must immediately—
(a) prepare a certificate of compliance indicating the system, part of the system or appliance (as the case requires) is safe; and
(b) either—
(i) deliver the certificate to the owner or occupier of the premises where the system is, or the appliance is or was, located; or
(ii) leave the certificate, addressed to the owner or occupier, at those premises; and
(c) fix a compliance plate in a conspicuous place to a permanent structure near the meter through which gas is conveyed to the consumer piping system or appliance; and
(d) record the applicable information on the compliance plate.
Penalty: 10 penalty units.
(3) The person must within 7 days send a copy of the certificate to—
(a) the regulator; and
(b) the owner or operator of the distribution pipeline from whose pipeline gas is conveyed to the system.
Penalty for contravention of subregulation (3): 10 penalty units.