Australian Capital Territory Numbered Regulations Australian Capital Territory Numbered Regulations“6. For the purposes of paragraph 26AG (3) (a) of the Act, the following requirements are prescribed:
(a) in respect of premises to be used for testing motor vehicles, other than motor cycles—
(i) brake testing equipment that complies with the requirements specified in Schedule 2 in relation to such equipment;
(ii) a luminous transmittance testing instrument that complies with the requirements specified in Schedule 2 in relation to such an instrument;
(iii) either of the following means of enabling a mechanic, while standing, to inspect the underside of motor vehicles:
(A) a pit of not less than 4.5 metres in length;
(B) a hoist which has a lifting capacity of not less than 2 tonnes;
(iv) a noise testing instrument that complies with the requirements specified in Schedule 2 in relation to such an instrument;
(v) a headlamp instrument device that complies with the requirements specified in Schedule 2 in relation to such an instrument;
(vi) wheel-rim callipers calibrated in inches or inches and centimetres to the range of 5 to 8 inches in half inch increments;
(vii) a device for measuring, in millimetres, the depth of grooves in a tyre's tread through the range of 1 to 10 millimetres in 1 millimetre increments;
(b) in respect of premises to be used for testing motor cycles—equipment of the kind referred to in subparagraphs (a) (iv), (v) and (vii); and
(c) in respect of premises to be used for the inspection and testing of trailers—
(i) equipment of the kind referred to in subparagraphs (a) (vi) and (vii); and
(ii) 1 or more of the following means for inspecting the underside of trailers:
(A) a pit;
(B) a hoist;
(C) a jack and garage creeper.”.