Australian Capital Territory Numbered Regulations Australian Capital Territory Numbered Regulations(1) The following devices must be tested in accordance with this section at least once every 12 months:
(a) a laser speed measuring device;
(b) the laser speed measuring device component of a digital camera detection device.
(2) The test must be carried out—
(a) by a person approved under section 24 (Approved people—testing and sealing—Act, s 24 (1)); and
(b) in accordance with Australian Standard AS 4691.1-2003, as in force from time to time.
Note AS 4691.1-2003 does not need to be notified under the Legislation Act
because s 47 (6) does not apply (see s (3) and Legislation Act
, s 47 (7)). The standard may be purchased at www.standards.org.au
.
(3) The Legislation Act
, section 47 (6) does not apply in relation to AS 4691.1-2003 under subsection (2) (b).
(4) The test must show whether the device—
(a) is operating in accordance with the manufacturer's specifications; and
(b) is accurate within a tolerance of 2km/h.
(5) For this section, it is sufficient for the laser speed measuring device component of a digital camera detection device to be tested separately from the other components of the device, and it is not necessary for the other components to be tested.