Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (SAFETY AND TRAFFIC MANAGEMENT) REGULATION 2017 (NO 45 OF 2017) - REG 22

    (1)     This section applies to a laser speed measuring device, other than a device mentioned in section 21.

    (2)     The operator of the laser speed measuring device must ensure that the following operations are done in accordance with the manufacturer's instructions for the device:

        (a)     testing the device at the beginning and end of each shift of the operator by carrying out the following checks:

              (i)     an instrument confidence check;

              (ii)     a calibration verification check;

              (iii)     a scope alignment check;

        (b)     activating the device;

        (c)     operating the device.

    (3)     To remove any doubt, if the device is used at more than 1 place during a shift of the operator, the operator is not required to carry out the checks mentioned in subsection (2) (a) each time the device is activated at a different place.

    (4)     If the device is used by 2 or more operators who are working together during the shift, the tests mentioned in subsection (2) (a) may be carried out by different operators.