Australian Capital Territory Numbered Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 10

Mass and loading requirements for heavy vehicles

    (1)     The following vehicles and loads must comply with the requirements in schedule 1 (Mass and loading requirements for heavy vehicles):

        (a)     a heavy vehicle together with its load (if any);

        (b)     a heavy combination together with its load (if any).

    (2)     However, subsection (1) does not apply to the following:

        (a)     a class 1 vehicle as far as a class 1 notice or a class 1 permit exempts the vehicle from a requirement of schedule 1;

        (b)     a class 3 vehicle as far as a class 3 notice or a class 3 permit exempts the vehicle from a requirement of schedule 1;

        (c)     an eligible vehicle as far as the eligible vehicle is permitted to operate at a higher mass limit under section 46 (When eligible vehicles may operate at higher mass limits).



AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback