Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 18

    (1)     A class 1 permit must state the following:

        (a)     the name and address of the person to whom the permit is issued;

        (b)     the vehicle to which the permit applies, including the registration number (if any);

        (c)     for a combination—the registration number (if any) of the front prime mover to which the permit applies;

        (d)     the areas or routes to which the permit applies;

        (e)     the provisions of this regulation or the Road Transport (Vehicle Registration) Regulation 2000 from which exemption is given;

        (f)     the conditions (if any) on the permit;

Note     A class 1 permit may include a condition that 1 or more pilot vehicles or escort vehicles must accompany a class 1 vehicle while the vehicle is travelling.

        (g)     when the permit ends.

    (2)     Without limiting subsection (1) (d), a class 1 permit must include the conditions mentioned in schedule 2, part 2.7 (Warning lights) and part 2.8 (Warning signs) that apply to the vehicle to which the permit applies.

    (3)     The permit may incorporate the conditions mentioned in subsection (2) by reference.