Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 25

    (1)     A class 2 permit must state the following:

        (a)     the name and address of the person to whom the permit is issued;

        (b)     the vehicle to which the permit applies, including the registration number (if any);

        (c)     for a combination—the registration number (if any) of the front prime mover to which the permit applies;

        (d)     the areas or routes to which the permit applies;

        (e)     the conditions (if any) on the permit;

        (f)     when the permit ends.

    (2)     A class 2 permit may include conditions about any of the following:

        (a)     the areas or routes to which the permit applies;

        (b)     if a route includes a bridge, culvert or causeway (a route crossing )—

              (i)     which part or parts of the route crossing may be used; and

              (ii)     the speed limit for the route crossing; and

              (iii)     whether the route crossing must be free of other traffic before it is used;

        (c)     when the vehicle must not be used;

        (d)     for a combination—axle spacings on the combination;

        (e)     for a road train—the total mass limit of the road train;

        (f)     the speed limit in the areas or on the routes.