Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 28

    (1)     The road transport authority may, by notice (a class 3 notice )—

        (a)     exempt a stated kind of class 3 vehicle from—

              (i)     a mass or dimension requirement mentioned in schedule 1 (Mass and loading requirements for heavy vehicles), other than a requirement about a GVM, GCM or manufacturer's limit; or

Note     Mass and dimension requirements about a GVM, GCM or manufacturer's limit are mentioned in sch 1, div 1.1.1 and s 1.8.

              (ii)     a dimension limit mentioned in the Road Transport (Vehicle Registration) Regulation 2000 ; or

Note 1     Dimension limits are mentioned in the Road Transport (Vehicle Registration) Regulation 2000 , s 163 and sch 1.

Note 2     A person or vehicle is exempt from a dimension limit or any other requirement of the Road Transport (Vehicle Registration) Regulation 2000 if the person or vehicle is exempted from the limit or requirement under this regulation (see Road Transport (Vehicle Registration) Regulation 2000 , s 163).

        (b)     declare—

              (i)     areas in which a stated kind of class 3 vehicle may operate; or

              (ii)     routes on which a stated kind of class 3 vehicle may operate.

    (2)     A class 3 notice may be conditional.

Note     Section 33 sets out conditions to which some class 3 notices may be subject.

    (3)     A class 3 notice is a notifiable instrument.

Note     A notifiable instrument must be notified under the Legislation Act.