TRADE MEASUREMENT (MEASURING INSTRUMENTS) REGULATIONS (NO. 27 OF 1991) - REG 10 10. (1) If an inspector considers it to be necessary to examine or test a component part of a measuring instrument for the purpose of verifying or re-verifying the instrument and that cannot be done without dismantling the instrument, the inspector may require the owner of the measuring instrument to comply with subregulation (2).

Australian Capital Territory Numbered Regulations

[Index] [Table] [Search] [Search this Regulation] [Notes] [Noteup] [Previous] [Next] [Download] [Help]

TRADE MEASUREMENT (MEASURING INSTRUMENTS) REGULATIONS (NO. 27 OF 1991) - REG 10

10. (1) If an inspector considers it to be necessary to examine or test a component part of a measuring instrument for the purpose of verifying or re-verifying the instrument and that cannot be done without dismantling the instrument, the inspector may require the owner of the measuring instrument to comply with subregulation (2).

(2) The owner of a measuring instrument complies with this clause if the owner—

(a) dismantles the measuring instrument or causes it to be dismantled; or

(b) consents to the measuring instrument being dismantled by the inspector and absolves the inspector from liability for any damage caused in the course of its dismantling or re-assembly.

(3) If the owner fails to comply with subregulation (2) when required to do so by an inspector, the measuring instrument must not be used for trade while the failure continues.

Owner to provide and pay for labour etc.

AustLII: Copyright Policy | Disclaimers | Privacy Policy | Feedback