Australian Capital Territory Numbered Regulations Australian Capital Territory Numbered Regulations(1) A unit title application must be accompanied by the following diagrams:
(a) a boundary diagram showing the following and their relationship to each other:
(i) the boundaries of the parcel;
(ii) the extremities of each building on the parcel at (or projected to) ground level;
(iii) the boundaries of any class B units;
(b) if the application provides for a building to be subdivided so that any class A unit is completely or partly above another class A unit, a separate diagram for each floor of the building showing—
(i) sufficient particulars, at floor level, to allow the vertical boundaries of each unit on that floor to be worked out (without necessarily stating any bearings or dimensions); and
(ii) the approximate floor area of each unit;
(c) if the application provides for a building to be subdivided into class A units otherwise than as mentioned in paragraph (b), a diagram showing—
(i) sufficient details, at floor level, to allow the vertical boundaries of each unit on that floor to be worked out (without necessarily stating any bearings or dimensions); and
(ii) the approximate floor area of each unit.
(2) The diagrams mentioned in subregulation (1) (a) and (c) may be combined.
(3) The diagrams required by this regulation must also show—
(a) any unit subsidiary consisting of a building or part of a building as if the subsidiary were a class A unit; and
(b) any other unit subsidiary as if the subsidiary were a class B unit.