Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 20

    (1)     In this regulation:

class 2 vehicle means a restricted access vehicle that—

        (a)     complies with the mass and dimension limits in—

              (i)     schedule 1 (Mass and loading requirements for heavy vehicles); and

              (ii)     the Road Transport (Vehicle Registration) Regulation 2000 ; and

        (b)     is one of the following:

              (i)     a B-double;

              (ii)     a road train;

              (iii)     a controlled access bus not more than 14.5m long;

              (iv)     a combination carrying vehicles on 2 or more decks that, together with its load, is—

    (A)     higher than 4.3m but not higher than 4.6m; or

    (B)     longer than 19m;

              (v)     a vehicle or a combination that is—

    (A)     higher than 4.3m but not higher than 4.6m; and

    (B)     built to carry cattle, sheep, pigs or horses.

Note     The axle load limits in sch 1 apply to class 2 vehicles.

    (2)     In this section:

"controlled access bus" means a bus that is longer than 12.5m, other than a bus that is—

        (a)     an articulated vehicle; or

        (b)     an articulated bus.