Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 22

    (1)     A class 2 notice must state the following:

        (a)     that the notice applies to—

              (i)     all class 2 vehicles; or

              (ii)     stated kinds of class 2 vehicles;

        (b)     the areas or routes to which the notice applies;

        (c)     the conditions (if any) on the notice.

    (2)     A class 2 notice may include conditions about any of the following:

        (a)     the areas or routes to which the notice applies;

        (b)     if a route includes a bridge, culvert or causeway (a route crossing )—

              (i)     which part or parts of the route crossing may be used; and

              (ii)     the speed limit for the route crossing; and

              (iii)     whether the route crossing must be free of other traffic before it is used;

        (c)     when class 2 vehicles, or a stated kind of class 2 vehicle, must not operate in the area or on the route;

        (d)     for a combination—axle spacings on the combination;

        (e)     for a road train—the total mass limit of the road train;

        (f)     the speed limit in the areas or on the routes.