Australian Capital Territory Numbered Regulations

ROAD TRANSPORT (MASS, DIMENSIONS AND LOADING) REGULATION 2010 (NO 4 OF 2010) - REG 32

A class 3 permit must state the following:

        (a)     the name and address of the person to whom the permit is issued;

        (b)     the vehicle to which the permit applies, including the registration number (if any);

        (c)     for a combination—the registration number (if any) of the front prime mover to which the permit applies;

        (d)     the areas or routes to which the permit applies;

        (e)     the provisions of this regulation or the Road Transport (Vehicle Registration) Regulation 2000 from which exemption is given;

        (f)     the conditions (if any) on the permit;

Note     Section 33 sets out conditions to which some class 3 permits may be subject.

        (g)     when the permit ends.